Eiger Safety Logo : Three Buildings Safety Logo

safety systems that protect lives

Guard Rails

Edge-Shield fixed or freestanding edge protection

Permanent guard rails or handrail systems are the best way of preventing falls from height. Eiger Edge-Shield free standing guard-rails are an economic means of providing permanent or temporary fall protection.
With Edge-Shield, clients, designers, contractors, planning supervisors and employers can meet their obligations under the following legislation:

  • Construction (Design & Management) Regulations 1994, clauses 13(2)(a) and 14(a)
  • The Workplace (Health, Safety & Welfare) Regulations 1992, clause 13(b)
  • The Construction (Health, Safety & Welfare) Regulations 1996, clause 8(1) to (5)
  • The Management of Health & Safety at Work Regulations 1999, clause 8(1)(c)

Eiger Edge-Shield

Eiger Edge-Shield is a free-standing counter balanced system offering protection against falls from roof edges. It can be either fully galvanized, Aluminum and in harsher environments in Stainless Steel. For the permanent use on roof edges and balconies. On construction sites it can be easily assembled to prevent falls from roof openings, open lift shafts, stairwells etc.

Correctly installed, there is no possibility of Edge-Shield systems causing damage to the roof or subsequent leaks. The system does not require permanently fixing to the roof and protective rubber pads are applied to all surfaces intended to be in contact with the roof. It passes all current testing and conforms to the current standards.

It is height adjustable to assist levelling for aesthetic appeal and individual legs may be raised, rotated and/or removed for roof maintenance without dismantling the system.

Eiger Fold-Shield

Fold-Shield

Eiger Fold-Shield can be lowered flat to the roof area when not in use and is ideal where aesthetics and local planning regulations are an issue. Operatives simply raise the Fold-Shield and lock it in place when required and complete their task without being at risk. When completed it can be lowered out of sight safely from the edge.

Eiger Top-Shield

Eiger Top-Shield is a guard-rail system for direct attachment to profile metal sheet roofing with a pitch of up to 10 degrees. It sits on a self-sealing rubber gasket which the base plate is then tech-screwed through this into the metal sheeting below.

Edgeshield conforms to EN13374

Free standing guard rail

These links just change the images around with javascript

  • Eiger Safety top shield
  • Eiger Safety top shield
  • Eiger Safety top shield

Click to enlarge

Website by Accent Design top